Xavitech, a small company in the middle of Sweden, develops, manufactures, and supplies diaphragm pumps for every demand of gas and liquid flows in the range of 1-1000 ml/min.
Our expertise in electronics and software, as well as mechanical engineering, makes our Xavitech team strong and well suited to guide you to the best solution. We strive to ensure our customer’s satisfaction with our technology and service, from the selection of a pump model to system integration.
Clients value our great flexibility, high quality, and market leading lifetime.
Ideal for all MedTech pump applications
Since 2007 Xavitech has supplied thousands of pumps every year to medical capnography devices and other instruments for gas analysis. A prerequisite for reliable analysis results is low pulsations or pressure oscillations. Our pumps are designed to create as small pulsations as possible, and the pump flow varies very little, thanks to a short stroke length at a high frequency. Customers have measured up to ten times smaller pressure oscillations using Xavitech pumps compared to other available diaphragm pumps for air sampling.
Today our products have a broad installed base within MedTech applications and are used with sensors for detection and monitoring of respiratory gases as oxygen (O2) and carbon dioxide (CO2), incubators for embryos, sleep observations, sleep apnea, and alcolock devices. In laboratories Xavitech micropumps can be found in gas and water analyzers, in automated coverslippers for histology and in cell culture incubators. It has also been tested for NPWT (negative pressure wound therapy), portable lungs, metabolic measurements (CPET – cardiopulmonary exercise testing) and alcohol- and drug samplers.
Even Xavitech’s typical industrial and environmental pump applications such as aerosol sampling, portable measuring instruments, salmonella detection and food packaging should have great potential in medical technology – for example in COVID-19 related measurement and monitoring.
Previous
Next
Intelligent pumps with integrated software
Xavitech’s pump technology aims for the premium segment with high-quality demands such as long lifetime, low pulsations, low noise, and precision. Our pumps are unique in ways of control and customization due to the built-in micro controller.
With a guaranteed lifetime up to 35 000 hours our pumps stand in a class of its own. Pure linear movements without any rotating parts are the key for long life. The patented X-life motor, an electromagnet in combination with a spring which’s movement are controlled by a built-in PCB with IR sensors gives unique opportunities to control the pumps and for the pumps to send signals back to the system. Use the serial interface with our standard commands to start or stop the pump, change the pump speed, and store new settings in the pump memory. A lower flow can be achieved without reducing maximum vacuum/pressure. For more advanced features we can create customized software’s for as many different functions as there are ideas.
Three physical pump sizes make the foundation of our pump range, and they can all work as either pressure or vacuum pumps. Each pump that leaves our workshop is individually programmed, calibrated, and tested either as a standard pump or as a customized model for a specific application.
Are you looking for a high-quality pump but have no need for sophisticated control and a very long lifetime? Not to worry, we have pump configurations for different lifetime demands starting at 5000 hours as well as a normal 2 wire connection for ordinary start and stop operations.
Choose different pump configurations to run the pump on any DC Voltage between 5-24V, standard pumps are calibrated for either 5V, 12V or 24V. Different material options for the wetted parts are available suitable for the most pumping media imaginable.
Our approach to solving Your development and engineering challenges
It is easy to integrate a Xavitech pump into your system. Either the pump configuration is done by Xavitech engineers – or you use our Bluetooth adapter and App to set-up flow rate or vacuum power yourself. Just connect your android device to the pump and experiment with different flows, store new settings and restore to original speed. Alternatively, a microcomputer can be connected to the pump via the serial port, to adjust and store pump settings in the pump memory. All pumps can operate on battery. Even the installation of Xavitech pumps, for example on a PCB, is simple with our vibration absorbing pump mounts.
By processing data on working conditions, the pump can automatically take necessary measures in real time to adjust its performance according to condition changes, which makes it possible to create customized software for various purposes. Custom calibration may also give you system savings by reducing the number of additional components needed in your system.
Examples of customized software:
Silent mode
Energy saving mode
Battery operation – constant flow regardless of battery voltage
Pressure-/Vacuum-maintaining mode
Time interval control
Delay in start up
Switch between different modes
Other customizations:
Choose Your custom calibration point for flow, frequency, stroke length or pressure
We optimize Your pump for a specific value range of flow, frequency, stroke length or pressure to give You the possibility to fine tune Your pump within a certain value range
Close cooperation with clients around the world
In 2005 our founder got an excellent idea. He was working with capnography machines, but the micro pumps used in the machines were of too low quality and broke continuously. That was the incitement he needed to start developing a new revolutionary pump technology. Today our patented pumps are used in systems every day all over the world and have even been represented in space. Xavitech delivered pumps to NASA and the pumps were installed in a greenhouse project on the ISS.
Xavitech’s main office is located in Sweden. Together with our distributors in the USA, UK, Australia/New Zealand, Germany, Italy, South Korea, and China we are reaching out to the global market.
Are you interested in our products and want to know more? Don’t hesitate to contact us. Our Xavitech team and our distributors will gladly answer your questions.
At Xavitech we have the perfect pump for you! Download our product brochure for details on our standard range of pumps and accessories, find inspiration by checking out our application examples and read about development projects. As always, if you have any questions, please feel free to contact us…
Are you looking for a high-quality pump but have no need for sophisticated control and a very long lifetime? Not to worry, we have pump configurations for different lifetime demands starting at 5000 hours as well as a normal 2 wire connection for ordinary start and stop operations.
Choose different pump configurations to run the pump on any DC Voltage between 5-24V, standard pumps are calibrated for either 5V, 12V or 24V. Different material options for the wetted parts are available suitable for the most pumping media imaginable.
By processing data on working conditions, the pump can automatically take necessary measures in real time to adjust its performance according to condition changes, which makes it possible to create customized software for various purposes. Custom calibration may also give you system savings by reducing the number of additional components needed in your system.
Examples of customized software:
